In order to properly adjust the Dexter electric brake assemblies on your travel trailer, you will first need to raise the trailer and check that the wheel and drum rotate freely. Remove the adjusting hole cover from the slot on the bottom of the assembly's backing plate. With an adjusting tool like # W80630, rotate the starwheel of the adjuster assembly to expand the brake shoes. You will just need to adjust the brake shoes out until the pressure of the linings against the drum makes the... view full answer...
Yes, that is correct, if you do not have the factory prep package for the Furrion Vision S, # FCE48TASL-05, you will need to drill the mounting holes yourself and run the wiring.
I have attached an installation video to assist. view full answer...
The B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs # BWRVK3400 should not be loosening as you state and it does sound like you have either a stripped bolt because it tightens to an extent and then loosens but will allow you to tighten again to that same point.
I've attached the installation details that state it should be torqued to 80 foot lbs for use. This bolt draws the hitch firmly into the bed of the truck ensuring the underbed connection... view full answer...
We have kits that are designed for connecting an auxiliary tank to a propane setup on a fifth wheel like yours but we don't recommend trying to fill up what you have now with a 100 lb tank. What you'd need is the MB Sturgis Sturgi-Stay T-Fitting w/ Hoses for POL Valve # 103539-MBS.
This is a tee fitting setup that installs in the feed line of the tank setup which allows you to basically add in a connection from an additional tank like you are wanting to do. view full answer...
Go To Results